Perlick Ice Maker Repair in Spring Hill, FL

Perlick's undercounter ice makers freeze cubes from circulating water, so dissolved minerals stay behind in the water instead of locking into the ice. That is how they make clear cubes, and it is also why they scale up. As deposits build, harvest slows, cubes come out small or misshapen, and eventually production stops. The drain is the other half of the story. Many Perlick ice makers carry a factory drain pump, and a pump that fails or a line that clogs leaves water in the bin or under the unit. On a lanai, add leaves and grit in the drain path and summer heat that keeps the machine working hard. We look at the water supply, the drain and the freezing surface before refrigeration, because that is where most Perlick ice calls end up.

Beyond that, an under-counter Perlick breathes through a grille at the front, so keeping that grille and the condenser clean is its most important maintenance.

First places we look on this model line: Drain pump failed, water standing in the bin; Mineral scale slowing the harvest; Water inlet valve not opening; Supply line kinked or filter clogged; Bin too warm, cubes fusing together.

Treat them as leads. The same symptom can come from a part that costs little or one that costs a lot, which is why we prove the cause at the house before quoting.

In the concrete-block ranch houses in Spring Hill, the second ice maker usually lives in the garage, where summer air runs well past what a standard model is rated for. The owner's manual lists the ambient range it was built for, and we look at that before pricing a repair.

A garage in Spring Hill can hold a ice maker in heat well above the room it was designed for through the summer. We check its rated ambient range before pricing a repair; sometimes moving it, or a garage-rated model, is the real fix.

Whatever the make, the ice maker complaint most often misread is an ice maker given up for dead when the line behind the fridge got kinked during cleaning or the valve screen has clogged with minerals.

What we keep an eye on for a ice maker in Spring Hill: hard water scaling up fill valves and molds, and ice makers that froze up during a power outage and never cycled properly again.

Humidity works on refrigerators, too. Door gaskets sweat, the cabinet's edges bead with water, and a seal that doesn't close fully lets damp air in to frost the freezer and load the defrost system.

Check a seal by closing the door on a sheet of paper; if it slides out without resistance, the gasket isn't sealing there. A dishwasher that leaves everything wet is a related story, since rinse aid and the heated-dry setting matter more in muggy kitchens.